MONDAY, OCTOBER 15, 2012
How to add a Peter Pan Collar to Any Top
Peter Pan collars are everywhere right now...
From J.Crew...
To Anthropologie...
You'll find them on t-shirts, sweaters, and dresses. The bad news? Tops like the ones above can be priced up to $98, which, as cute as they are, I'm not willing to spend on a shirt. The good news? You don't have to spend $98! Most of us already have one (or three) sweaters or dresses in our closet that can easily be transformed, and today I'm going to show you how!
Ready to take this...
To this?
Let's get started...
Materials:
round necked top (or dress) - remember that if you're using a sweater with a small neck opening that relies on stretch to get over your head, that adding a non-stretchy collar might make it difficult to get the sweater on - make sure you'll still be abe to wear the sweater after the collar is added :)
cotton scraps large enough to cut 4 front/back collar pieces
mid-to-heavy-weight fusible interfacing (I used Pellon 930F)
Instructions:
1. Fold your top in half as pictured. Try to keep the natural shape of the curve in place.
2. To make your collar pattern, trace the curve between center front to center back.
3. Sketch your collar shape on each end of the curve as desired - I made the front collar a bit larger than the back.
4. Trace around the entire collar, 1/2" away on all sides (to account for seam allowance).
5. Cut your pattern out and use it to cut 4 collar pieces out of your fabric, plus 4 pieces out of interfacing (I had to adjust my curved seam allowance to 1/4" to fit the pattern piece on my fabric).
6. Fuse interfacing to each collar piece.
7. Right sides together, stitch two collar pieces together along outer curve (inner curve will remain open). Trim seam allowance to 1/8". Repeat with remaining two collar pieces.
8. Turn collar right side out and press flat. Topstitch along outer curve 1/4" away from edge. Repeat with other collar piece.
9. Serge the inner curve, removing NO fabric with the serger blade, or zig-zag stitch along inner curve. Repeat with other collar piece.
10. Mark center front and center back of top with pins and pin collar to wrong side as pictured (the more pins the merrier, especially if sewing with one stretchy and one non-stretchy fabric. The collar should overlap the neck edge 1/2".
11. Stitch along pinned edge, attaching collar to top. Repeat steps 10-11 with other collar piece.
12. Fold collars over and press flat in place against top.
13. Topstitch around entire neckline and collars, 1/4" from folded edge of collar.
You are done!
Enjoy your new Peter Pan top!
